Added: Nalani Rowen - Date: 01.11.2021 22:05 - Views: 23154 - Clicks: 5787
Your Kirby vacuum cleaner can remove loose dirt and debris from deep within the carpet fibers, but it can sometimes leave stubborn stains behind, such as pet urine, soda spills and ground-in dirt.
Rather than purchase a separate carpet cleaning machine, Kirby offers a shampooer assembly that attaches to your current vacuum. The assembly turns your vacuum into a carpet shampooer without the need to invest in an additional machine that can take up valuable storage space.
Step on the power button at the back of your Kirby vacuum cleaner to turn off the vacuum. Lift up on the headlight cap at the front of your vacuum to assess the nozzle assembly. Look on the front of the nozzle assembly for the belt lifter. Hook up kirby shampooer on your model, the lifter could be square or round.
Pull the handle from the front of the belt lifter. Use the handle to rotate the belt lifter counterclockwise until the red arrow painted on the belt lifter lines up with the red arrow painted on the nozzle assembly. Find the nozzle lock lever attached to the body of the vacuum and directly above the belt lifter.
Rotate the lever left or right to release the nozzle assembly from the vacuum. Lift up on the front of the nozzle assembly as you pull it from the vacuum to remove it. Look at the top of the vacuum handle for the bag hanger Hook up kirby shampooer.
Find the release button on the hanger bar. Push in on the button to free up the top of the vacuum bag assembly. Grab the bottom of the vacuum bag assembly where it attaches to the body of the vacuum. Rotate the bottom back of the bag assembly away from the vacuum body until you can lift the bag assembly from the vacuum.
Place the shampooer tray assembly on the floor. Make sure the shampooer brush roll faces the carpet. Reach into the opening on the top of the brush roll shield and grab the brush roll belt. Expose the top of the belt by pulling it up through the roll shield. Line up the two arms attached to the shampooer nozzle assembly with the two triangular tabs on the outside of the tray assembly at each end of the brush roll shield.
Push the nozzle assembly onto the tray assembly. Look for the belt lifter on the front of the shampooer nozzle assembly. Pull the handle from the belt lifter. Use the handle to rotate the belt lifter counterclockwise to lift the belt on the shampooer brush roll. Find the horizontal nozzle attaching shaft directly below the motor shaft protruding from the front of the Hook up kirby shampooer.
Set the hooks along the bottom back of the shampooer nozzle assembly and attached tray assembly over the nozzle attaching shaft. Push the nozzle against the body of the vacuum. Rotate the nozzle lock lever to the left or right to lock the shampooer nozzle assembly and tray to the vacuum. Pull the handle from the belt lifter on the nozzle.
Rotate the belt lifter clockwise until the green arrows line up on the nozzle and lifter. Push the handle back into the belt lifter. Make sure the filter sponge and suds screen are attached to the bottom openings on the shampooer tank assembly. Mix water and Kirby carpet shampoo in the shampooer tank assembly according to the label directions on the shampoo bottle.
Hold the shampooer tank assembly perpendicular to the side of the vacuum where you removed the bottom of the bag assembly. Hook up kirby shampooer up the large opening on the tank with Hook up kirby shampooer opening on the vacuum. Lower the tank onto the vacuum opening. Rotate the tank clockwise until it locks in place and rests against the vacuum body. Push one end of the shampooer hose assembly onto the small opening in the bottom of the tank.
Push the other end of the hose assembly over the small tube sticking up from the center of the shampooer tray assembly. Cecilia Harsch has been writing professionally since She writes mainly home improvement, health and travel articles for various online publications. She has several years of experience in the home-improvement industry, focusing on gardening, and a background in group exercise instruction. Harsch received her Certified Nurses Assistant in She attended Tarrant County College and studied English composition.
By Cecilia Harsch.
Related Articles. References GoVacuum.Hook up kirby shampooer
email: [email protected] - phone:(109) 522-9927 x 1776
How to Attach a Shampooer to a Kirby Vacuum Cleaner